US Patent Application 18449845. COPOLYMER, MOLDED ARTICLE, INJECTION MOLDED ARTICLE AND COVERED WIRE simplified abstract
Jump to navigation
Jump to search
Contents
COPOLYMER, MOLDED ARTICLE, INJECTION MOLDED ARTICLE AND COVERED WIRE
Organization Name
Inventor(s)
Keizou Shiotsuki of Osaka (JP)
COPOLYMER, MOLDED ARTICLE, INJECTION MOLDED ARTICLE AND COVERED WIRE - A simplified explanation of the abstract
This abstract first appeared for US patent application 18449845 titled 'COPOLYMER, MOLDED ARTICLE, INJECTION MOLDED ARTICLE AND COVERED WIRE
Simplified Explanation
The patent application describes a copolymer made up of tetrafluoroethylene and perfluoro(propyl vinyl ether) units.
- The copolymer has a specific content of perfluoro(propyl vinyl ether) unit, ranging from 3.2 to 3.7% by mass with respect to the total monomer units.
- The melt flow rate of the copolymer at 372°C falls between 22.0 to 27.0 g/10 min.
- The copolymer has a limited number of functional groups, with 50 or less per 10 main-chain carbon atoms.
Original Abstract Submitted
There is provided a copolymer containing tetrafluoroethylene unit and perfluoro(propyl vinyl ether) unit, wherein the copolymer has a content of perfluoro(propyl vinyl ether) unit of 3.2 to 3.7% by mass with respect to the whole of the monomer units, the melt flow rate at 372° C. of 22.0 to 27.0 g/10 min, and the number of functional groups of 50 or less per 10main-chain carbon atoms.