QUALCOMM Incorporated patent applications published on September 28th, 2023
Contents
- 1 MODEL HYPERPARAMETER ADJUSTMENT USING VEHICLE DRIVING CONTEXT CLASSIFICATION (17655837)
- 2 POSITION ACCURACY USING SENSOR DATA (18326149)
- 3 ON DEMAND POSITIONING (18327028)
- 4 MEMORY SYSTEM WITH ADAPTIVE REFRESH (17650455)
- 5 SIMULATED LOW BIT-WIDTH QUANTIZATION USING BIT SHIFTED NEURAL NETWORK PARAMETERS (18103428)
- 6 WEIGHTS LAYOUT TRANSFORMATION ASSISTED NESTED LOOPS OPTIMIZATION FOR AI INFERENCE (18040385)
- 7 SYSTEM AND METHOD FOR PERFORMING SEMANTIC IMAGE SEGMENTATION (17669040)
- 8 VEHICLE MONITORING (17702221)
- 9 NETWORK BASED SENSOR SHARING FOR COMMUNICATIONS SYSTEMS (17706058)
- 10 SRAM with Scan Mode (17702770)
- 11 PACKAGE SUBSTRATES EMPLOYING PAD METALLIZATION LAYER FOR INCREASED SIGNAL ROUTING CAPACITY, AND RELATED INTEGRATED CIRCUIT (IC) PACKAGES AND FABRICATION METHODS (17656477)
- 12 INTEGRATED DEVICE AND INTEGRATED PASSIVE DEVICE COMPRISING MAGNETIC MATERIAL (17705041)
- 13 ANTENNA MODULES EMPLOYING A PACKAGE SUBSTRATE WITH A VERTICALLY-INTEGRATED PATCH ANTENNA(S), AND RELATED FABRICATION METHODS (17651324)
- 14 ADAPTIVE RF SENSING AIDED WITH REAL-TIME NON-RF MEASUREMENTS (17650503)
- 15 QUASI-COLLOCATION (QCL) ASSUMPTION OF SIMULTANEOUS PHYSICAL UPLINK CONTROL CHANNEL (PUCCH) AND PHYSICAL UPLINK SHARED CHANNEL (PUSCH) (18000274)
- 16 CHANNEL STATISTICS BASED ADAPTIVE BEAM WEIGHT ESTIMATION (17701131)
- 17 BEAM SWITCHING DIVERSITY ACROSS SLOTS (17656492)
- 18 INTERFERENCE MITIGATION BY PSEUDO-RANDOM MUTING FOR SOUNDING REFERENCE SIGNALS (17656300)
- 19 HYBRID AUTOMATIC REPEAT REQUEST CODEBOOK TRANSMISSION (17650624)
- 20 SOFT HYBRID AUTOMATIC REPEAT REQUEST CONFIGURATION (18002731)
- 21 MRB ARCHITECTURE WITH PDCP RETRANSMISSION (18006557)
- 22 SIDELINK RECEPTION WITH MULTIPLE TRANSMISSION RECEPTION POINTS (18006722)
- 23 TIME DOMAIN DEMODULATION REFERENCE SIGNAL FOR CHANNEL ESTIMATION (17656180)
- 24 PHYSICAL DOWNLINK SHARED CHANNEL TRANSMISSION CONFIGURATION INDICATOR STATE MAPPING (17656181)
- 25 DUPLEXITY SWITCHING FOR NETWORK POWER SAVING MODES (17655975)
- 26 TIME SENSITIVE COMMUNICATION ASSISTANCE INFORMATION FOR EXTENDED REALITY DATA TRAFFIC (17656335)
- 27 APPLICATION DATA UNITS (17656565)
- 28 MODEL PARAMETER DERIVATION OF LOCAL ILLUMINATION COMPENSATION IN THE LUMA MAPPING WITH CHROMA SCALING-MAPPED DOMAIN IN VIDEO CODING (18325738)
- 29 VARIABLE PING RATE FOR A LOCATION TRACKER (18328220)
- 30 METHOD AND APPARATUS FOR COMMUNICATING COLLISION RELATED INFORMATION (17702006)
- 31 INTELLIGENT DETECTION OF USER EQUIPMENT USAGE TO IMPROVE USER PACKET SWITCHED DATA EXPERIENCE IN MULTI-SUBSCRIBER IDENTITY MODULE DEVICES (17656638)
- 32 IN-VEHICLE MACHINE LEARNING SERVICE (17649763)
- 33 MITIGATION OF RECEIVER SATURATION VIA BEAM ADJUSTMENT (18069940)
- 34 SERVING CELL MEASUREMENT OBJECTS ASSOCIATED WITH ACTIVE BANDWIDTH PARTS (18155369)
- 35 INDICATION OF PREFERRED AND RESTRICTED BEAMS (17703677)
- 36 AUTOENCODER SELECTION FEEDBACK FOR AUTOENCODERS IN WIRELESS COMMUNICATION (18041090)
- 37 CARRIER AGGREGATION CAPABILITY SIGNALING (18325462)
- 38 MULTI-DOMAIN NETWORK DATA FLOW MODELING (18049159)
- 39 RELAY USER EQUIPMENT SWITCHING AFTER BEAM FAILURE (17656493)
- 40 MOBILITY-AWARE ACCESS CONTROL (18296090)
- 41 MEASUREMENTS OF LINEAR COMBINATIONS OF BEAMS (17656379)
- 42 SIDELINK DISCONTINUOUS RECEPTION (DRX) MANAGEMENT (18041673)
- 43 ITERATIVE WAKE UP SIGNALING FOR POWER SAVING (17706188)
- 44 TECHNIQUES FOR FLEXIBLE CONFIGURATION OF POWER CONTROL PARAMETERS (17684120)
- 45 UE SIGNALING INSERTION LOSS FOR SRS ANTENNA SWITCHING (18020075)
- 46 OVER-THE-AIR SIGNALING FOR INTER-BASE STATION CROSS LINK INTERFERENCE MEASUREMENTS (17681577)
- 47 METHODS AND SYSTEMS FOR RESOURCE POOL AND SIDELINK PRIMARY CELL SWITCHING (17703573)
- 48 RADIO FREQUENCY SENSING ASSISTED WIRELESS COMMUNICATION (17654208)
- 49 BEAM UPDATING FOR MULTIPLE TRANSMISSION RECEPTION POINTS (17896584)
- 50 TRANSMISSION CONFIGURATION INDICATOR STATE DETERMINATION BASED ON MULTIPLE CONTROL CHANNEL REPETITIONS (17665474)
- 51 COMPONENT CARRIER SWITCHING FOR WIRELESS COMMUNICATION DEVICES (18041201)
- 52 USER EQUIPMENT INDICATION OF CODE BLOCK MAPPING TYPE PREFERENCE FOR PHYSICAL DOWNLINK SHARED CHANNEL (17656403)
- 53 TECHNIQUES FOR SCHEDULING MULTI-USER SIDELINK COMMUNICATIONS IN MULTIPLE TIME PERIODS (17702526)
- 54 RESOURCE BLOCK GRID ALIGNMENT AT SIDELINK NODES (17704910)
- 55 PHYSICAL DOWNLINK CONTROL CHANNEL (PDCCH) RELIABILITY USING SIDELINK (17650158)
- 56 PHYSICAL UPLINK SHARED CHANNEL REPETITIONS (18041655)
- 57 SIDELINK FEEDBACK CHANNEL RESOURCE MAPPING IN UNLICENSED SPECTRUM (18041049)
- 58 BANDWIDTH PART (BWP) FOR UNICAST/MULTICAST AND RESOURCE ALLOCATION FOR MULTICAST (18321946)
- 59 DOWNLINK POSITIONING REFERENCE SIGNAL CONFIGURATION AND PROCESSING IN FULL DUPLEX SCENARIOS (18327330)
- 60 RESOURCE ALLOCATION FOR JOINT COMMUNICATIONS AND RADIO FREQUENCY (RF) SENSING (17701480)
- 61 METHODS AND SYSTEMS FOR ALIGNING TRANSMISSIONS FOR INTRA-BAND CARRIER AGGREGATION IN SIDELINK COMMUNICATIONS (17703784)
- 62 CHANNEL OCCUPANCY TIME SHARING AWARE RESOURCE SELECTION FOR UNLICENSED CV2X COMMUNICATIONS (18041341)
- 63 CHANNEL SENSING FOR DYNAMIC FREQUENCY SELECTION (DFS)-ASSISTED SIGNALS (18252665)
- 64 NETWORK ASSISTED INITIAL ACCESS FOR HOLOGRAPHIC MIMO (18005153)
- 65 METHODS TO HANDLE SLICING ACCOUNTING FOR EVOLVED PACKET DATA GATEWAY WI-FI ACCESS (18325832)
- 66 NEW BEAM IDENTIFICATION FOR PHYSICAL DOWNLINK CONTROL CHANNEL (PDCCH) REPETITION (18018634)
- 67 USER EQUIPMENT POWER SAVING ALGORITHM FOR DISCONTINUOUS RECEPTION SCENARIOS (17702616)
MODEL HYPERPARAMETER ADJUSTMENT USING VEHICLE DRIVING CONTEXT CLASSIFICATION (17655837)
Abstract
In some aspects, a device of a vehicle may obtain information relating to an environment in which the vehicle is located. The device may determine using a machine learning model, a driving context of the vehicle based at least in part on the information relating to the environment, and a set of hyperparameters for a model, that is used to determine a driving behavior for the vehicle, based at least in part on the driving context. The device may determine, using the model configured with the set of hyperparameters, the driving behavior for the vehicle. The device may cause autonomous operation of the vehicle in accordance with the driving behavior. Numerous other aspects are described.
Inventor
Ahmed Kamel SADEK
POSITION ACCURACY USING SENSOR DATA (18326149)
Abstract
Techniques are provided for determining a location of a mobile device based on visual positioning solution (VPS). An example method for determining a position estimate of a mobile device includes obtaining sensor information, detecting one or more identifiable features in the sensor information, determining a range to at least one of the one or more identifiable features, obtaining coarse map information, determining a location of the at least one of the one or more identifiable features based on the coarse map information, and determining the position estimate for the mobile device based at least in part on the range to the at least one of the one or more identifiable features.
Inventor
Gautam NIRULA
ON DEMAND POSITIONING (18327028)
Abstract
The subject matter disclosed herein relates to determining a background location of a mobile device using one or more signal metrics.
Inventor
Marc Anthony ISCHE
MEMORY SYSTEM WITH ADAPTIVE REFRESH (17650455)
Abstract
A memory system with adaptive refresh commands is disclosed. In one aspect, a memory system or device that has multiple banks within a channel may receive a per bank command that indicates a first bank to be refreshed and provides additional information about a second bank to be refreshed. In a further exemplary aspect, a quad bank refresh command may be sent that indicates a first bank to be refreshed and provides additional information about second through fourth banks to be refreshed. In a further exemplary aspect, an octa bank refresh command may be sent that indicates a first bank to be refreshed and provides additional information about second through eighth banks to be refreshed. The three new refresh commands allow adjacent or spaced banks to be refreshed.
Inventor
Pankaj Deshmukh
SIMULATED LOW BIT-WIDTH QUANTIZATION USING BIT SHIFTED NEURAL NETWORK PARAMETERS (18103428)
Abstract
A processor-implemented method includes bit shifting a binary representation of a neural network parameter. The neural network parameter has fewer bits, b, than a number of hardware bits, B, supported by hardware that processes the neural network parameter. The bit shifting effectively multiplies the neural network parameter by 2. The method also includes dividing a quantization scale by 2to obtain an updated quantization scale. The method further includes quantizing the bit shifted binary representation with the updated quantization scale to obtain a value for the neural network parameter.
Inventor
Marinus Willem VAN BAALEN
WEIGHTS LAYOUT TRANSFORMATION ASSISTED NESTED LOOPS OPTIMIZATION FOR AI INFERENCE (18040385)
Abstract
Various embodiments include methods and devices for weight layout transformation of a weight tensor. Embodiments may include, accessing a first memory to retrieve weights of the weight tensor in a transformed order that is different than an order for retrieving the weights for a calculation at a network layer of a trained machine learning model, and loading the weights to a second memory in the transformed order. Embodiments may further include retrieving the weights from the second memory in the transformed order, and reordering the weights to the order for implementing the calculation at the network layer of the trained machine learning model.
Inventor
Haijun ZHAO
SYSTEM AND METHOD FOR PERFORMING SEMANTIC IMAGE SEGMENTATION (17669040)
Abstract
Systems and techniques are provided for performing semantic image segmentation using a machine learning system (e.g., including one or more cross-attention transformer layers). For instance, a process can include generating one or more input image features for a frame of image data and generating one or more input depth features for a frame of depth data. One or more fused image features can be determined, at least in part, by fusing the one or more input depth features with the one or more input image features, using a first cross-attention transformer network. One or more segmentation masks can be generated for the frame of image data based on the one or more fused image features.
Inventor
Shuai ZHANG
VEHICLE MONITORING (17702221)
Abstract
A method of vehicle-to-vehicle monitoring includes: receiving, at a monitor vehicle, a trigger to provide a report relating to a target vehicle, the trigger including identifying information of the target vehicle; obtaining, at the monitor vehicle, first information wirelessly that at least partially identifies the target vehicle; determining, at the monitor vehicle, that the first information corresponds to the identifying information of the target vehicle; and reporting, from the monitor vehicle based on receipt of the trigger and determining that the first information corresponds to the identifying information of the target vehicle, second information indicating presence of the target vehicle and a location associated with the target vehicle.
Inventor
Abha KHOSLA
NETWORK BASED SENSOR SHARING FOR COMMUNICATIONS SYSTEMS (17706058)
Abstract
Systems and techniques are described for providing an enhanced vehicle-to-everything (V2X) see-though use case. For example, a method for wireless communication at a network entity may include receiving, at the network entity, sensor data from one or more devices, the sensor data comprising at least one of sensing measurements associated with one or more objects in an environment or information associated with a respective device of the one or more devices. The method may include generating, at the network entity, one or more advisory messages for one or more recipient vehicles based on at least a portion of the sensor data. The method may further include transmitting, from the network entity, the one or more advisory messages to the one or more recipient vehicles.
Inventor
Mohammed Ataur Rahman SHUMAN
SRAM with Scan Mode (17702770)
Abstract
A memory is provided with a clock circuit configured to simultaneously assert a write multiplexer clock signal and a read multiplexer clock signal during a scan mode of operation. In the scan mode of operation, a scan in signal routes through a write multiplexer to a first bit line while the write multiplexer clock signal is asserted. Similarly, the scan in signal routes from the first bit line through a read multiplexer while the read multiplexer clock signal is asserted.
Inventor
Arun Babu PALLERLA
PACKAGE SUBSTRATES EMPLOYING PAD METALLIZATION LAYER FOR INCREASED SIGNAL ROUTING CAPACITY, AND RELATED INTEGRATED CIRCUIT (IC) PACKAGES AND FABRICATION METHODS (17656477)
Abstract
Package substrates employing a pad metallization layer for increased signal routing capacity, and related integrated circuit (IC) packages and fabrication methods. To support increased signal routing density in an IC package while mitigating an increase in overall IC package thickness, an outer metallization layer of the package substrate is provided as a thinner, pad metallization layer. A metal layer in the pad metallization layer includes metal pads for forming external connections to the package substrate. This allows an area in the adjacent metallization layer that would otherwise have larger width metal pads for forming external interconnects, to be used for other signal routing within the package substrate. This can increase the overall signal routing density of the package substrate while mitigating the increase in overall package substrate thickness if a full-sized additional metallization layer were added to the package substrate.
Inventor
Joan Rey Villarba Buot
INTEGRATED DEVICE AND INTEGRATED PASSIVE DEVICE COMPRISING MAGNETIC MATERIAL (17705041)
Abstract
An integrated device that includes a die substrate comprising a plurality of transistors, an interconnection portion coupled to the die substrate, and a packaging portion coupled to the interconnection portion. The interconnection portion includes at least one die dielectric layer and a plurality of die interconnects coupled to the plurality of transistors. The packaging portion includes at least one magnetic layer and a plurality of metallization interconnects coupled to the plurality of die interconnects.
Inventor
Kai LIU
ANTENNA MODULES EMPLOYING A PACKAGE SUBSTRATE WITH A VERTICALLY-INTEGRATED PATCH ANTENNA(S), AND RELATED FABRICATION METHODS (17651324)
Abstract
Antenna modules employing a package substrate with a vertically-integrated patch antenna(s), and related fabrication methods. The antenna module includes a radiofrequency (RF) IC (RFIC) package that includes one or more RFICs for supporting RF communications and a package substrate that includes one or more metallization layers with formed metal interconnects for routing of signals between the RFICs and an antenna(s) in the package substrate. The package substrate includes one or more patch antennas that are planar-shaped and vertically integrated in a plurality of metallization layers in the package substrate, behaving electromagnetically as a patch antenna. In this manner, the patch antenna(s) can be formed as a vertically-integrated structure in the package substrate with fabrication methods used for fabricating metal interconnects and vias (e.g., a micro via fabrication process) in package substrates.
Inventor
Suhyung Hwang
ADAPTIVE RF SENSING AIDED WITH REAL-TIME NON-RF MEASUREMENTS (17650503)
Abstract
Aspects presented may enable RF sensing to be adaptive to the environment to improve the sensing, performance, and/or the spectrum efficiency of cellular systems and the power efficiency of RF sensing nodes. In one aspect, an RF sensing node extracts one or more features for a set of objects of an area via at least one non-RF sensor. The RF sensing node transmits, to a network entity, the one or more features or at least one non-RF measurement derived from the one or more features. The RF sensing node receives, from the network entity, an RRS transmission configuration derived based on the one or more features or the at least one non-RF measurement transmitted to the network entity.
Inventor
Weimin DUAN
QUASI-COLLOCATION (QCL) ASSUMPTION OF SIMULTANEOUS PHYSICAL UPLINK CONTROL CHANNEL (PUCCH) AND PHYSICAL UPLINK SHARED CHANNEL (PUSCH) (18000274)
Abstract
This disclosure provides systems, methods and apparatus, including computer programs encoded on computer storage media, for wireless communications. In one aspect, a user equipment (UE) may receive, from a base station, a configuration message indicating a first beam associated with an uplink control transmission and downlink control information (DCI) indicating a second beam associated with the uplink data transmission. The UE may select the first beam or the second beam based on an overlap in time between the uplink control transmission and the uplink data transmission. The base station may identify the first beam or the second beam based on the overlap between the uplink control transmission and the uplink data transmission. The UE may transmit, and a base station may receive, at least a portion of the uplink control transmission and at least a portion of the uplink data transmission using the selected first beam or second beam.
Inventor
Fang YUAN
CHANNEL STATISTICS BASED ADAPTIVE BEAM WEIGHT ESTIMATION (17701131)
Abstract
Methods, systems, and devices for wireless communications are described. In some examples, a user equipment (UE) may receive a control message indicating a set of sampling beams defined for the UE. The UE may measure a set of received signal strengths for communications from a wireless node associated with a set of linear combinations of sampling beams from the set of sampling beams defined at the UE. The UE may calculate a set of entries of a channel covariance matrix based on the set of received signal strengths of the set of linear combinations of the sampling beams from the set of sampling beams defined for the UE. As such, the UE may communicate with the wireless node based on applying a set of beam weights to an antenna array of the UE. In some examples, the set of beam weights may be based on the channel covariance matrix.
Inventor
Vasanthan Raghavan
BEAM SWITCHING DIVERSITY ACROSS SLOTS (17656492)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a network node may receive an indication of a beam switching mode for reception of a communication spanning multiple slots. The network node may receive the communication in a first group of symbols of the multiple slots using a first beam in accordance with the beam switching mode. The network node may receive the communication in a second group of symbols of the multiple slots using a second beam in accordance with the beam switching mode. Numerous other aspects are provided.
Inventor
Vasanthan RAGHAVAN
INTERFERENCE MITIGATION BY PSEUDO-RANDOM MUTING FOR SOUNDING REFERENCE SIGNALS (17656300)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may receive, from a network entity, a configuration of at least one sounding reference signal (SRS) resource, wherein the configuration indicates a pseudo-random sequence for muting an SRS associated with the at least one SRS resource. The UE may transmit the SRS using the at least one SRS resource based at least in part on the pseudo-random sequence. Numerous other aspects are described.
Inventor
Mostafa KHOSHNEVISAN
HYBRID AUTOMATIC REPEAT REQUEST CODEBOOK TRANSMISSION (17650624)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may determine a quantity of hybrid automatic repeat request (HARQ) codebooks capable of being stored by the UE, a maximum amount of HARQ codebook data capable of being stored by the UE, or a maximum HARQ codebook size capable of being stored by the UE, and may transmit, to a network node, capability information that indicates the quantity of HARQ codebooks capable of being stored by the UE, the maximum amount of HARQ codebook data capable of being stored by the UE, or the maximum HARQ codebook size capable of being stored by the UE. Numerous other aspects are described.
Inventor
Konstantinos DIMOU
SOFT HYBRID AUTOMATIC REPEAT REQUEST CONFIGURATION (18002731)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may receive a downlink communication including a priority indicator indicating that a first priority for a received transmission is to trigger hybrid automatic repeat request (HARQ) feedback of a first type of HARQ feedback or indicating that a second priority for the received transmission is to trigger HARQ feedback of a second type of HARQ feedback, the first type of HARQ feedback including information associated with link adaptation, the information not included in the second type of HARQ feedback. The UE may transmit the HARQ feedback, as a response to the received transmission, based at least in part on receiving the downlink communication and in accordance with whether the first type of HARQ feedback or the second type of HARQ feedback is triggered. Numerous other aspects are provided.
Inventor
Konstantinos DIMOU
MRB ARCHITECTURE WITH PDCP RETRANSMISSION (18006557)
Abstract
Embodiments include systems and methods for supporting for supporting retransmission in a multicast session in a Fifth Generation (5G) New Radio (NR) (5G NR) radio access network (RAN). Various embodiments may provide an enhanced multicast radio bearer (MRB) architecture leveraging Packet Data Convergence Protocol (PDCP) status reporting by wireless devices to a base station of a 5G NR RAN. Various embodiments may support multiple Radio Link Control (RLC) entities, also referred to as RLC legs, in a multicast session. One or more multicast RLC legs may be used for multicast and/or unicast transmission to wireless devices and a unicast RLC leg may be used for unicast transmission to a specific wireless device. Various embodiments may enable PDCP level retransmission of PDCP protocol data units (PDUs).
Inventor
Prasad Reddy KADIRI
SIDELINK RECEPTION WITH MULTIPLE TRANSMISSION RECEPTION POINTS (18006722)
Abstract
Methods, systems, and devices for wireless communications are described. A user equipment (UE) with multiple transmission reception points (TRPs) (e.g., a multi-TRP UE) may receive sidelink control information including an interference measurement configuration indicating resources allocated for sidelink interference measurements across multiple TRPs. In some cases, the multi-TRP UE may decode the sidelink control information including the interference measurement configuration. The multi-TRP UE may receive one or more signals from a first UE, a second UE, or both. The multi-TRP UE may perform a sidelink interference measurement for each signal based on the interference measurement configuration. The multi-TRP UE may determine whether to process the signals in combination or separately across TRPs based on the sidelink interference measurements.
Inventor
Sourjya Dutta
TIME DOMAIN DEMODULATION REFERENCE SIGNAL FOR CHANNEL ESTIMATION (17656180)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a network node may obtain a demodulation reference signal (DMRS) having a constant envelope in a time domain. The network node may generate a communication signal based at least in part on multiplexing the DMRS with a plurality of data resource elements. Numerous other aspects are described.
Inventor
Matan GUETTA
PHYSICAL DOWNLINK SHARED CHANNEL TRANSMISSION CONFIGURATION INDICATOR STATE MAPPING (17656181)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may receive configuration information identifying a set of transmission configuration indicator (TCI) states and a TCI-field codepoint mapping, wherein an active subset of the set of TCI states is active in accordance with a default configuration. The UE may communicate, based at least in part on the TCI-field codepoint mapping and the default configuration, using a default active TCI state of the active subset of the set of TCI states. Numerous other aspects are provided.
Inventor
Iyab Issam SAKHNINI
DUPLEXITY SWITCHING FOR NETWORK POWER SAVING MODES (17655975)
Abstract
This disclosure provides systems, devices, apparatus, and methods, including computer programs encoded on storage media, for duplex switching based on network power modes. A UE may receive a first indication that a first power mode of a network entity is associated with a first duplex type for the network entity and a second power mode of the network entity is associated with a second duplex type for the network entity. The first duplex type and the second duplex type may correspond to at least one of full-duplex communication or half-duplex communication. The UE may receive a second indication of a switch from the first power mode associated with the first duplex type to the second power mode associated with the second duplex type and communicate with the network entity based on the second power mode and the second duplex type for the network entity.
Inventor
Ahmed Attia ABOTABL
TIME SENSITIVE COMMUNICATION ASSISTANCE INFORMATION FOR EXTENDED REALITY DATA TRAFFIC (17656335)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a network node may receive time sensitive communication assistance information (TSCAI), associated with extended reality data traffic, that comprises at least one of multimedia cadence information, timing update information, timing offset information, configurable parameter set information, or extended reality specific traffic pattern information. The network node may transmit feedback associated with the TSCAI. Numerous other aspects are described.
Inventor
Hyun Yong LEE
APPLICATION DATA UNITS (17656565)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a network node may receive application data for transmission via an additional network node. The network node may provide the application data to the additional network node, the application data having one or more indications of groupings into application data units (ADUs) added before being provided to the additional network node. Numerous other aspects are described.
Inventor
Yih-Hao LIN
MODEL PARAMETER DERIVATION OF LOCAL ILLUMINATION COMPENSATION IN THE LUMA MAPPING WITH CHROMA SCALING-MAPPED DOMAIN IN VIDEO CODING (18325738)
Abstract
An example device for decoding video data includes memory configured to store the video data and one or more processors implemented in circuitry and communicatively coupled to the memory. The one or more processors are configured to reshape a pixel domain reference template block using a forward mapping function into a mapped domain reference template block and derive local illumination compensation (LIC) model parameters from the mapped domain reference template block and a mapped domain neighboring reconstruction template block. The one or more processors are configured to apply the LIC model parameters to motion-compensated prediction signals and decode the video data based on the application of the LIC model parameters.
Inventor
Chun-Chi Chen
VARIABLE PING RATE FOR A LOCATION TRACKER (18328220)
Abstract
Disclosed are techniques for calculating a predicted location of a location tracking device. In an aspect, a wireless communications device detects a breach of a geofence made by the location tracking device, receives data representing a state of the location tracking device, the state of the location tracking device comprising at least a current location of the location tracking device and a velocity of the location tracking device, and determines, based on the data representing the state of the location tracking device, the predicted location of the location tracking device.
Inventor
Andrea VILLA
METHOD AND APPARATUS FOR COMMUNICATING COLLISION RELATED INFORMATION (17702006)
Abstract
A communication device mounted on a vehicle, e.g., On-Board Unit (OBU), communicates collision related information to other road entities, e.g., other vehicles or roadside units (RSUs) or a server, after a collision is detected. The OBU may temporarily store basic safety messages (BSMs) (and optionally sensor data) for a predesignated number of seconds before discarding the BSMs (and optionally sensor data) on a continuing basis. When a collision is detected, the OBU sends a report, e.g., to a server, with the stored BSMs (and optionally sensor data) to a server. After a collision detection, the OBU may send a request to other vehicles to upload relevant collision related information. Additionally, if a first vehicle detects the collision of a second vehicle, the first vehicle may communicate collision related information to other entities and a server.
Inventor
Abha KHOSLA
INTELLIGENT DETECTION OF USER EQUIPMENT USAGE TO IMPROVE USER PACKET SWITCHED DATA EXPERIENCE IN MULTI-SUBSCRIBER IDENTITY MODULE DEVICES (17656638)
Abstract
In an aspect of the disclosure, a method, a computer-readable medium, and an apparatus for wireless communication of a user equipment (UE) is provided. The apparatus may obtain one or more metrics associated with one or more usage parameters of a subscriber identity module (SIM) of the UE. The apparatus may determine whether the SIM is primarily used for data, based on the one or more metrics. The apparatus may configure the SIM to be data centric based on determining that the SIM is primarily used for data.
Inventor
Harshan VENKATASALAM
IN-VEHICLE MACHINE LEARNING SERVICE (17649763)
Abstract
Aspects presented herein may enable wireless communications to be adaptive to a dynamic environment, where wireless devices may manage wireless communications, such as performing beam managements, based at least in part on environmental conditions. In one aspect, a network entity receives, from a sensor device or a UE, a request for an ML data service. The network entity establishes, with the sensor device or the UE, the ML data service based on the request. The network entity receives, from the sensor device, ML data including a set of features extracted from at least one sensor of the sensor device or information indicative of at least one beam for the ML data service. The network entity transmits, to the UE, a beam indication to modify the at least one beam based at least in part on the ML data received from the sensor device during the ML data service.
Inventor
Qing LI
MITIGATION OF RECEIVER SATURATION VIA BEAM ADJUSTMENT (18069940)
Abstract
Certain aspects of the present disclosure provide techniques wireless communication at a first wireless node generally including communicating with a second wireless device using a first beam, detecting at least one condition indicative of receiver saturation at the first wireless device or the second wireless device, and taking at least one action designed to mitigate the receiver saturation after detecting the at least one condition.
Inventor
Rahul MALIK
SERVING CELL MEASUREMENT OBJECTS ASSOCIATED WITH ACTIVE BANDWIDTH PARTS (18155369)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may receive, from a network entity, a configuration that indicates one or more measurement objects, wherein a measurement object of the one or more measurement objects indicates a synchronization signal block (SSB) frequency of a configured bandwidth part (BWP). The UE may determine, from the one or more measurement objects, a serving cell measurement object based at least in part on an active BWP of the UE, wherein the serving cell measurement object is associated with an SSB frequency in the active BWP. Numerous other aspects are described.
Inventor
Muhammad Nazmul ISLAM
INDICATION OF PREFERRED AND RESTRICTED BEAMS (17703677)
Abstract
Systems and methods for beam management in a wireless communication system are provided. In a network with a full duplex network entity communicating with two UEs, the network entity may configure cross-link interference (CLI) resources such that the interference between the devices may be characterized. One UE may transmit a reference signal which is read by the other device. Based on the measurement, a report may be sent to the network entity. The network entity may use the information in the report to then base scheduling decisions, and/or indicate to the UEs which beams are restricted from use in order to avoid excessive interference.
Inventor
Yan ZHOU
AUTOENCODER SELECTION FEEDBACK FOR AUTOENCODERS IN WIRELESS COMMUNICATION (18041090)
Abstract
Various aspects of the present disclosure relate to wireless communication. In some aspects, a client may receive a selection feedback configuration associated with a reporting procedure for reporting updates corresponding to at least one autoencoder index associated with one or more autoencoders selected by the client. The client may determine an update corresponding to the at least one autoencoder index. The client may transmit the update based at least in part on the selection feedback configuration. Numerous other aspects are provided.
Inventor
Alexandros MANOLAKOS
CARRIER AGGREGATION CAPABILITY SIGNALING (18325462)
Abstract
Methods, systems, and devices for wireless communication are described. Techniques to use capability information for user equipment in wide band systems such as millimeter wave systems. The capability information can include information indicative of support for limited non-contiguous intra-band carrier aggregation. The capability information can include information indicative of support for sharing time and frequency tracking information between cells.
Inventor
Timo Ville VINTOLA
MULTI-DOMAIN NETWORK DATA FLOW MODELING (18049159)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a network entity may generate a data flow model for a domain associated with the network entity, the domain being part of a multi-domain network. The network entity may obtain a set of measured flow rates and a set of expected flow rates that are calculated based at least in part on the data flow model. The network entity may selectively update the data flow model based at least in part on an accuracy of the data flow model, with the accuracy determined based at least in part on the set of measured flow rates and the set of expected flow rates. Numerous other aspects are described.
Inventor
Jordi ROS GIRALT
RELAY USER EQUIPMENT SWITCHING AFTER BEAM FAILURE (17656493)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a relay user equipment (UE) may detect a beam failure on an access link. The relay UE may transmit, to a network entity and responsive to the beam failure, information indicating that a UE, that uses the relay UE for relaying communications with the network entity, is to use a different relay UE. Numerous other aspects are described.
Inventor
Shanyu ZHOU
MOBILITY-AWARE ACCESS CONTROL (18296090)
Abstract
Certain aspects of the present disclosure provide techniques for mobility-aware access control. A method that may be performed by a first wireless device generally includes receiving one or more signals from a second wireless device in the network, wherein the one or more signals provide an indication of a mobility state corresponding to the second wireless device; determining whether to establish a connection with the second wireless device based, at least in part, on the indication of the mobility state corresponding to the second wireless device; and taking one or more actions based on the determination. Other aspects, embodiments, and features are also claimed and described.
Inventor
Navid Abedini
MEASUREMENTS OF LINEAR COMBINATIONS OF BEAMS (17656379)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may measure one or more linear combinations, of a set of beams, from a radio access network (RAN) node. Accordingly, the UE may transmit a report, based at least in part on measuring the one or more linear combinations, to the RAN node. The one or more linear combinations may be indicated in one or more rules stored in a memory of the UE or may be indicated in a system information block or a radio resource configuration message. Numerous other aspects are described.
Inventor
Hamed PEZESHKI
SIDELINK DISCONTINUOUS RECEPTION (DRX) MANAGEMENT (18041673)
Abstract
Certain aspects provide a method for wireless communication by a first user equipment (UE). The method may include: receiving information regarding at least one sidelink communication using sidelink discontinuous reception (DRX) for at least one application or service; determining at least one first sidelink DRX configuration based on the information; transmitting, to at least one second UE, an indication of the at least one first sidelink DRX configuration for the at least one sidelink communication; and receiving, from the at least one second UE, an indication of whether the at least one first sidelink DRX configuration is accepted for the at least one sidelink communication
Inventor
Qing LI
ITERATIVE WAKE UP SIGNALING FOR POWER SAVING (17706188)
Abstract
Methods, systems, and devices for wireless communications are described. A vehicle user equipment (VUE) may transmit an iterative wake-up signal (WUS) to a first roadside unit (RSU). The iterative WUS may include location information associated with an expected path of the VUE and may instruct the first RSU to transmit one or more other WUSs to at least a second RSU that supports communication along a portion of the expected path of the VUE. In some cases, the first RSU may transmit an iterative WUS to the second RSU, the second RSU may transmit an iterative WUS to a third RSU, and so on until the final RSU along the expected path is woken up with a normative (e.g., non-iterative) WUS. An RSU may provide safety information to the VUE, and after the VUE leaves a service area associated with an RSU, the RSU may activate a low power mode.
Inventor
Anantharaman Balasubramanian
TECHNIQUES FOR FLEXIBLE CONFIGURATION OF POWER CONTROL PARAMETERS (17684120)
Abstract
Techniques and devices for wireless communications are described. A user equipment (UE) may receive a first message indicating a first configuration for a set of resources for transmitting reference signals. The first configuration may include a first indication of a first set of power control parameters corresponding to the set of resources and a second indication of a set of transmission configuration indicator (TCI) states. The UE may receive a second message indicating a second configuration for the set of TCI states. The second configuration may include a third indication of a second set of power control parameters corresponding to the set of TCI states. The UE may transmit the reference signals in accordance with the first set of power control parameters or the second set of power control parameters.
Inventor
Tianyang Bai
UE SIGNALING INSERTION LOSS FOR SRS ANTENNA SWITCHING (18020075)
Abstract
Method and apparatus to signal insertion loss for SRS antenna switching. The apparatus determines an insertion loss for each antenna of a plurality of antennas. The apparatus generates an offset matrix correction based at least on the insertion loss for each antenna of the plurality of antennas. The apparatus transmits the offset matrix correction to a base station. The apparatus may transmit an SRS, at a maximum power, from each antenna of the plurality of antennas to each receive antenna of the base station. The apparatus may collect insertion loss information for each antenna of the plurality of antennas. The insertion loss information indicates at least a power difference for each of the plurality of antennas at the UE.
Inventor
Ryan Scott Castro SPRING
OVER-THE-AIR SIGNALING FOR INTER-BASE STATION CROSS LINK INTERFERENCE MEASUREMENTS (17681577)
Abstract
Methods, systems, and devices for wireless communications are described. A network entity, such as a base station, may receive, from a first network entity, a broadcast indicating a downlink control channel transmission pattern associated with the first network entity. The network entity may monitor a plurality of receive beams for a plurality of downlink control channel transmissions from the first network entity according to the downlink control channel transmission pattern and may select a communication beam according to one or more cross-link interference (CLI) measurements associated with one or more of the plurality of receive beams in accordance with the monitoring. The network entity may communicate with a user equipment using the selected communication beam and a first set of resources that at least partially overlap in time and frequency with a scheduled communication at the first network entity. The network entity may experience or may cause the measured CLI.
Inventor
Qian Zhang
METHODS AND SYSTEMS FOR RESOURCE POOL AND SIDELINK PRIMARY CELL SWITCHING (17703573)
Abstract
A first device may be configured to implement a procedure for resource pool and sidelink primary cell switching. In some aspects, the first device may transmit, to a second device monitoring a first sidelink resource, a sidelink bandwidth configuration message causing the second device to monitor a second sidelink resource, and switch a primary resource designation from the first sidelink resource to the second sidelink resource, the primary resource designation corresponding to communication of management information and/or acknowledgement information. Further, the first device may communicate, based on the switching, the management information and/or the acknowledgement information with the second device via the second sidelink resource.
Inventor
Ahmed ELSHAFIE
RADIO FREQUENCY SENSING ASSISTED WIRELESS COMMUNICATION (17654208)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may obtain radio frequency (RF) sensing information indicating at least one of movement information associated with the UE or environment information associated with the UE. The UE may communicate, with a network entity, using a communication parameter that is based at least in part on the RF sensing information. Numerous other aspects are described.
Inventor
Hussein METWALY SAAD
BEAM UPDATING FOR MULTIPLE TRANSMISSION RECEPTION POINTS (17896584)
Abstract
Methods, systems, and devices for wireless communications are described. Aspects include configuring a user equipment (UE) to receive control signals from a first transmission reception point (TRP) and a second TRP. A first TRP may transmit a control signal to the UE indicating resources for receiving a medium access control element (MAC-CE), where the control signal includes an indication that associates the MAC-CE with the first TRP. The first TRP may transmit the MAC-CE to the UE which may include a beam update indication for the first TRP. The UE may transmit an acknowledgement to the first TRP based on receiving the MAC-CE. The UE may also transmit an acknowledgment to the second TRP indicating that it has received a beam update indication from the first TRP. In some cases, the first TRP may send a MAC-CE signal to the UE including beam update information for the second TRP.
Inventor
Arumugam Chendamarai Kannan
TRANSMISSION CONFIGURATION INDICATOR STATE DETERMINATION BASED ON MULTIPLE CONTROL CHANNEL REPETITIONS (17665474)
Abstract
Methods, systems, and devices for wireless communications are described in which network nodes may configure linked search space (SS) sets that provide multiple instances of control channel communications. A beam configuration, or transmission configuration indicator (TCI) state, for a downlink transmission scheduled by instances of the control channel communications may be determined based on a control resource set (CORESET) of one or more of the different SS sets. A first network node may decode a first control channel communication from one or more instances of the control channel communications, the first control channel communication indicating a resource allocation for a first downlink communication. The first network node may determine whether one or more TCI states are applied to the first downlink communication based on one or more CORESETs associated with the first control channel communication, and receive the first downlink communication based on the determined one or more TCI states.
Inventor
Mostafa Khoshnevisan
COMPONENT CARRIER SWITCHING FOR WIRELESS COMMUNICATION DEVICES (18041201)
Abstract
A wireless communication device is described. The wireless communication device includes a processor. The processor is configured to determine to switch from a first component carrier of a first band to a second component carrier. The processor is also configured to determine whether the second component carrier is included in the first band. The processor is further configured to, in a case it is determined that the second component carrier is included in the first band, transmit an uplink signal on the second component carrier.
Inventor
Alberto RICO ALVARINO
USER EQUIPMENT INDICATION OF CODE BLOCK MAPPING TYPE PREFERENCE FOR PHYSICAL DOWNLINK SHARED CHANNEL (17656403)
Abstract
In a wireless communication system, dynamic changes of a code block (CB) to resource element (RE) mapping type may improve decoding performance in some scenarios. A user equipment may provide an indication of a preferred CB mapping type. A base station may transmit a physical downlink shared channel (PDSCH) based on a first dynamic CB mapping type in one or more slots. A UE may receive the PDSCH and determine a second CB mapping type that is preferred by the UE based on a metric. The UE may transmit an indicator of the second CB mapping type, for example, as a one-bit or two-bit indicator, which may be coupled with a channel state information (CSI) report or signaled in uplink control information (UCI) independently from a CSI report. The base station may consider the indicator when selecting a new dynamic CB mapping type for the UE.
Inventor
Daniel PAZ
TECHNIQUES FOR SCHEDULING MULTI-USER SIDELINK COMMUNICATIONS IN MULTIPLE TIME PERIODS (17702526)
Abstract
Some aspects described herein relate transmitting a first stage sidelink control information (SCI) that schedules multiple transport blocks (TBs) of shared channel communications in multiple time divisions, wherein each of the multiple TBs is for a different receiving UE of multiple receiving UEs, transmitting, to a first receiving UE of the multiple receiving UEs and based on the first stage SCI, at least a first TB of the multiple TBs of shared channel communications in a first time division of the multiple time divisions, and transmitting, to a second receiving UE of the multiple receiving UEs and based on the first stage SCI, at least a second TB of the multiple TBs of shared channel communications in a second time division of the multiple time divisions. Other aspects relate to receiving the first stage SCI and at least one TB.
Inventor
Chih-Hao LIU
RESOURCE BLOCK GRID ALIGNMENT AT SIDELINK NODES (17704910)
Abstract
Methods, systems, and devices for wireless communications are described to support resource block (RB) grid alignment at user equipments (UE) in sidelink communications. In a first example, communicating UEs may support different RB grids and a receiving UE may attempt multiple decoding hypotheses for receiving a sidelink control channel from a transmitting UE, where each hypothesis may correspond to a different RB grid. In a second example, an RB grid for a sidelink control channel may be common, or aligned, for a transmitting UE and a receiving UE, such that the receiving UE may receive the sidelink control channel using the common RB grid. In a third example, demodulation reference signals (DMRSs) and resource element (RE) rate matching for a sidelink control channel may be common, or aligned, for a transmitting UE and a receiving UE, such that the receiving UE may receive the control channel using the aligned DMRSs.
Inventor
Chih-Hao Liu
PHYSICAL DOWNLINK CONTROL CHANNEL (PDCCH) RELIABILITY USING SIDELINK (17650158)
Abstract
Disclosed are techniques for wireless communication. In an aspect, a target user equipment (UE) receives, from a relay UE over a sidelink channel between the target UE and the relay UE, downlink control information (DCI) for a communication session between the target UE and a network entity, wherein the sidelink channel indicates search space information for a physical downlink control channel (PDCCH) between the target UE and the network entity carrying the DCI, and communicates with the network entity using a resource allocation granted by the DCI for a physical downlink channel, a physical uplink channel, or both between the target UE and the network entity based on the DCI and the search space information.
Inventor
Hua WANG
PHYSICAL UPLINK SHARED CHANNEL REPETITIONS (18041655)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may receive information indicating a quantity of repetitions for a physical uplink shared channel transmission that are to be transmitted in at least one time interval that includes time resources configured for downlink communication. The UE may transmit the quantity of repetitions, in respective time intervals that do not include time resources configured for downlink communication, using frequency hopping that is based at least in part on an indexing of the respective time intervals. Numerous other aspects are provided.
Inventor
Mostafa KHOSHNEVISAN
SIDELINK FEEDBACK CHANNEL RESOURCE MAPPING IN UNLICENSED SPECTRUM (18041049)
Abstract
Certain aspects of the present disclosure provide techniques for communicating using sidelink resources allocated in an unlicensed spectrum. A method that may be performed by a first UE includes receiving one or more transmissions from a second UE on one or more sidelink sub-channels spanning one or more resource block (RB) sets of an unlicensed spectrum occupied by the second UE for a channel occupancy time (COT) and transmitting, to the second UE, feedback information corresponding to the one or more received transmissions on a feedback channel based on a mapping between the one or more sidelink sub-channels and the feedback channel that confines the feedback channel to at least the one or more RB sets and one or more guard bands between the one or more RB sets of the unlicensed spectrum occupied by the second UE for the COT.
Inventor
Jing SUN
BANDWIDTH PART (BWP) FOR UNICAST/MULTICAST AND RESOURCE ALLOCATION FOR MULTICAST (18321946)
Abstract
Various aspects provide a method for radio resource allocation to support multicast services from a 5G-NR base station. In some aspects, the method may be performed by a processor of the base station. Various aspects include determining a multicast bandwidth part (BWP) within a carrier bandwidth, sending an indication of the multicast BWP to one or more user equipment (UE) computing devices in communication with the base station, and scheduling transmission of multicast data in the multicast BWP.
Inventor
Kazuki TAKEDA
DOWNLINK POSITIONING REFERENCE SIGNAL CONFIGURATION AND PROCESSING IN FULL DUPLEX SCENARIOS (18327330)
Abstract
Techniques are provided for utilizing positioning reference signals (PRS) in full duplex scenarios. An example method for wireless communication by a user equipment (UE) includes receiving a positioning reference signal in a time slot, wherein the positioning reference signal spans a first frequency bandwidth, transmitting a signal in a second frequency bandwidth during the time slot, wherein the second frequency bandwidth includes frequencies within the first frequency bandwidth, and processing the positioning reference signal received in the first frequency bandwidth excluding the frequencies in the second frequency bandwidth.
Inventor
Weimin DUAN
RESOURCE ALLOCATION FOR JOINT COMMUNICATIONS AND RADIO FREQUENCY (RF) SENSING (17701480)
Abstract
Systems and techniques for wireless communications are provided, including resource allocation for joint communications and RF sensing of objects. For example, a radar receiver (or component thereof) may determine a sensing measurement accuracy of the radar receiver based on one or more measurements associated with at least one target. The radar receiver (or component thereof) may transmit, based on the sensing measurement accuracy, a message to a network entity. The message may include an indication to modify an allocation of sensing resources associated with the radar receiver for communications data. The network entity (or component thereof) may receive the message from the radar receiver and may determine at least a portion of the sensing resources for the communications data. The radar receiver (or component thereof) may receive, from the network entity, resource allocation signaling for the communications data based on the indication to modify the allocation of sensing resources.
Inventor
Weimin DUAN
METHODS AND SYSTEMS FOR ALIGNING TRANSMISSIONS FOR INTRA-BAND CARRIER AGGREGATION IN SIDELINK COMMUNICATIONS (17703784)
Abstract
A user equipment may be configured to implement a procedure for aligning transmissions for intra-band carrier aggregation in sidelink communications. In some aspects, a user equipment may send one or more first transmissions to a second UE via a first sidelink component carrier, a first transmission of the one or more first transmissions including first user data. Further, the user equipment may send one or more second transmissions to a third UE via a second sidelink component carrier, the one or more first transmissions aligned with the one or more second transmissions and a second transmission of the one or more second transmissions including second user data and a repetition of a portion of the second user data.
Inventor
Ahmed ELSHAFIE
CHANNEL OCCUPANCY TIME SHARING AWARE RESOURCE SELECTION FOR UNLICENSED CV2X COMMUNICATIONS (18041341)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a user equipment (UE) may select, from an available resource pool, one or more resources for transmitting a packet on a channel. The UE may determine that a new shared channel occupancy time (COT) has been initiated on the channel. The UE may adapt at least one resource of the one or more resources for transmitting the packet based at least in part on determining that the new shared COT has been initiated. Numerous other aspects are provided.
Inventor
Stelios STEFANATOS
CHANNEL SENSING FOR DYNAMIC FREQUENCY SELECTION (DFS)-ASSISTED SIGNALS (18252665)
Abstract
Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a first base station may sense a channel based at least in part on a sensing time period. The first base station may receive, from a user equipment (UE), a dynamic frequency selection (DFS) signal on the channel during the sensing time period. The first base station may determine to refrain from communicating on one or more of a beam associated with the DFS-assisted signal or the channel on which the DFS-assisted signal is received for a defined duration of time, based at least in part on an indication of the one or more of the beam or the channel being added to a non-occupancy list. Numerous other aspects are described.
Inventor
Siyi CHEN
NETWORK ASSISTED INITIAL ACCESS FOR HOLOGRAPHIC MIMO (18005153)
Abstract
Certain aspects of the present disclosure provide techniques that may be executed by a new radio (NR) gNB for sending signaling to a user equipment (UE), which may indicate information that may enable the UE to measure synchronization signal blocks (SSBs) that each have an associated range and an associated direction, for performing an initial access procedure.
Inventor
Qiaoyu LI
METHODS TO HANDLE SLICING ACCOUNTING FOR EVOLVED PACKET DATA GATEWAY WI-FI ACCESS (18325832)
Abstract
Methods, systems, and devices for wireless communications are described. A user equipment (UE) may establish a cellular connection with a base station associated with a cellular radio network. The UE may receive an access policy of the cellular radio network identifying an access preference rule for the UE to adopt for connections to a core network function of the cellular radio network, the access preference rule indicating for the UE to preferentially connect to the core network function via a non-cellular radio network. The UE may determine that a gateway between the non-cellular radio network and the core network function of the cellular radio network is not configured. The UE may determine that a gateway selection policy of the cellular radio network is not configured. The UE may establish a connection to a legacy core network function of a legacy cellular radio network via a legacy gateway.
Inventor
Juan Zhang
NEW BEAM IDENTIFICATION FOR PHYSICAL DOWNLINK CONTROL CHANNEL (PDCCH) REPETITION (18018634)
Abstract
This disclosure provides systems, methods and apparatus, including computer programs encoded on computer storage media, for beam identification for physical downlink control channel (PDCCH) repetition. Upon beam failure detection, a user equipment (UE) may identify candidate beams for re-establishing communications. The UE can use a set of channel state information reference signal (RS) resource configuration or synchronization signal/physical broadcast channel block indexes to determine a set of candidate beams. The set may include a list of a pair of RSs or indexes for serving cells that have radio link qualities below a threshold. The UE may report the candidate beams to a base station (BS) via a Media Access Control (MAC) Control Element (MAC-CE) or a physical random-access channel (PRACH) transmission. The BS may provide a configuration signal a resource set that includes a pair of RSs or indexes for serving cells with radio link qualities below the threshold.
Inventor
Yan Zhou
USER EQUIPMENT POWER SAVING ALGORITHM FOR DISCONTINUOUS RECEPTION SCENARIOS (17702616)
Abstract
Certain aspects of the present disclosure provide techniques for enhancing a UE power savings mode. Certain aspects provide a method for wireless communication by a user equipment (UE) generally including receiving, from a network entity, signaling configuring the UE with discontinuous reception (DRX) parameters for a DRX mode, the DRX parameters including a DRX periodicity and DRX slot offset that define DRX off durations and transmitting, to the network entity, a request to modify the DRX slot offset after detecting at least one condition based on the DRX parameters.
Inventor
Parthasarathy KRISHNAMOORTHY