View source for US Patent Application 17661131. LAYER 1 / LAYER 2 SIGNALING FOR INTER-CELL MOBILITY WITH MULTIPLE TRANSMISSION RECEPTION POINTS simplified abstract

=LAYER 1 / LAYER 2 SIGNALING FOR INTER-CELL MOBILITY WITH MULTIPLE TRANSMISSION RECEPTION POINTS=


==Organization Name==

[[QUALCOMM Incorporated]]


==Inventor(s)==

[[Jelena Damnjanovic of Del Mar CA (US)]]


[[Mostafa Khoshnevisan of San Diego CA (US)]]


[[Yan Zhou of San Diego CA (US)]]


[[Tao Luo of San Diego CA (US)]]


[[Aleksandar Damnjanovic of Del Mar CA (US)]]


==LAYER 1 / LAYER 2 SIGNALING FOR INTER-CELL MOBILITY WITH MULTIPLE TRANSMISSION RECEPTION POINTS - A simplified explanation of the abstract==


*This abstract for appeared for US patent application  number 17661131 Titled 'LAYER 1 / LAYER 2 SIGNALING FOR INTER-CELL MOBILITY WITH MULTIPLE TRANSMISSION RECEPTION POINTS'

==Simplified Explanation==

The abstract describes a wireless communication system where a network node receives configuration information indicating when it should switch its functionality from an additional transmission reception point (TRP) to a primary TRP for a primary serving cell. The network node also receives a control signal that activates the primary TRP functionality based on the configuration information. The abstract mentions that there are other aspects described in the disclosure, but does not provide specific details about them.


==Original Abstract Submitted==

Various aspects of the present disclosure generally relate to wireless communication. In some aspects, a network node may receive configuration information, the configuration information indicating that a Layer 1 / Layer 2 (L1/L2) control signal is to be used to indicate when the network node is to: switch from additional transmission reception point (TRP) functionality to primary TRP functionality for a primary serving cell, or switch from a secondary serving cell to the primary serving cell and activate the primary TRP functionality. The network node may receive the L1/L2 control signal. The network node may activate, based at least in part on the L1/L2 control signal, the primary TRP functionality. Numerous other aspects are described.